日本SSD西西蒂条形防静**高压电源这是一种使用 HDC-AC 方式的小型棒型 AC 离子发生器。
日本SSD西西蒂条形防静**高压电源静电消除电极体积小,控制器和高压电源分开,因此可以安装在狭窄的空间内。 此外,它是一种高性能型,配备了各种传感器,例如高压异常检测、带电物体检测、离子量检测和放电针泄漏检测
这是采用 HDC-AC 方式的小型条形 AC 离子发生器。静电消除电极体积小,控制器和高压电源分离,即使在狭窄的空间也能安装。此外,它是配备了高压异常检测、带电物体检测、离子量检测、放电针脱落检测等各种传感器的高功能型。
Equipped with a discharge needle loose detection sensor (Needle Error)It is equipped witha newly developed discharge needle loss detection sensor (Needle Error). We will inform you of installation abnormalities such as forgetting to attach the discharge needle when replacing it.
Ion amount detection sensor (Cleaning)Equipped ion amount detection (Cleaning) notifies
you of a decrease in static elimination capacity due to dirt.
Equipped with a charged object proximity sensor, a
new charged object detection sensor function (ChargeSNS) is also installed. Detects the approach of an electrically charged object.
Increased length varietyElectrodes
can be manufactured in 40 mm increments from a minimum of 110 mm to a maximum of 1030 mm. Under 1m, the variety of products has increased compared to CABX.
30% improvement in static elimination performanceIn
the case of short-distance static elimination, the static elimination effect has been increased by 30% by optimizing the structure. (CABX Comparison)
Improved safetyA
safety cover is now included as standard on the discharge hand. It can be easily installed by sliding, so please attach it as necessary. (Fig. 1)
Fig. 1 Installation of discharge needle safety cover
Product model name
When ordering, please contact us with the following product model name. The controller and high-voltage power supply are set in one set for each electrode.
| Product model name | CABS-AW-y-z-xxxx *1 *2 |
|---|
| System configuration | Static elimination electrode (with 1m high-voltage cable) | CABS-DBW-xxxx *1 |
|---|
| High voltage power supply | CABS-TR1 |
|---|
| controller | CABS-CT1-xxxx *1 |
|---|
| CT-TR connection cable | CABS-CTRCB-2M (cable length 2 m) or CABS-CTRCB-5M (cable length 5 m) |
|---|
| Power & Signal Cables | CABS-PSCB-2M (cable length 2 m) or CABS-PSCB-5M (cable length 5 m) |
|---|
*1 The
controller is adjusted for each electrode length, so the length is listed in the model. It cannot be attached to electrodes of different lengths. In addition, it is not possible to connect multiple electrodes to the same controller or high-voltage transformer.
*2
y specifies the length of the CT-TR connection cable. 2:2 m and 5:5 m
z specify the length of the power and signal cables. 2:2m、5:5m
Product Variety
The length of the static neutral electrode can be selected from 110 mm to 1,030 mm.
The high-voltage power supply and the anti-static electrode are connected by a 1 m high-voltage cable.
y is the length of the CT-TR connection cable, and z is the length of the power and signal cables.
Example: CABS-AW-2-5-510
Electrode length: 510 mm, CT-TR connection cable: 2 m, Power and signal cable: 5 m
Air flow rate (typical example, reference value)
| Static elimination electrode length | Air pressure (MPa) |
|---|
| 0.1 | 0.2 | 0.3 | 0.4 | 0.5 |
|---|
| CABS-AW-y-z-110 | 3 | 4 | 6 | 7 | 9 |
|---|
| CABS-AW-y-z-270 | 10 | 16 | 22 | 27 | 32 |
|---|
| CABS-AW-y-z-430 | 18 | 28 | 37 | 47 | 56 |
|---|
| CABS-AW-y-z-590 | 25 | 38 | 50 | 63 | 76 |
|---|
| CABS-AW-y-z-750 | 32 | 48 | 65 | 82 | 99 |
|---|
| CABS-AW-y-z-910 | 37 | 58 | 78 | 98 | 119 |
|---|
| CABS-AW-y-z-1030 | 42 | 64 | 87 | 108 | 133 |
|---|
Unit:l/minANR
specification
| Model | CABS-AW-x-y-**** |
|---|
| System configuration | Static elimination electrode: CABS-DBW-××××*1 Controller: CABS-CT1-××××*1 High voltage power supply: CABS-TR1 CT-TR connection cable: CABS-CTRCB-xM (x=2 or 5) Power supply and signal cable: CABS-PSCB-yM (y=2 or 5) |
|---|
| Electrical Specifications | Input voltage: DV24V±5% Power consumption: 12VA Output voltage: ±8kV 0-p |
|---|
| Ion generation method | Corona discharge method |
|---|
| Air piping | Outline φ6 air tube |
|---|
| Maximum air supply pressure | 0.5MPa |
|---|
| Available air | Clean Dry Air |
|---|
| Static elimination time | Within 1.0 sec (at a distance of 300 mm, air pressure of 0.3 MPa, and electrode length of 350 mm) |
|---|
*1: The length of the electrode is entered. A type controller of the same length can be connected to the electrode.
External Drawing
View as PDF
View as PDF
View as PDF
各类日系工业品:,SSD西西蒂(离子风扇)、AND爱安得(电子天平)、SAN-EI三英(点胶阀) HOYA光源,KURABO脱泡机,USHIO牛尾照度计,Tsubosaka壶坂电机,IMV爱睦威,PISCO匹士克接头,hakko八光电机,lambda拉姆达膜厚仪,MUSASHI武藏,SAKURAI樱井,aitec艾泰克,otsuka大塚(膜厚仪、粒度仪),Hitachi日立(扫描电镜),MIKASA米卡萨(旋涂设备、显影)、POLARION普拉瑞、AITEC艾泰克(检查光源)、Iwasaki岩崎、OTSUKA大塚电子(光学膜厚仪)、KOSAKA小坂(台阶仪)、HORIBA堀场仪器(分析仪)、SIBATA柴田科学(环境测定)、TORAY东丽浓度仪(氧气分析仪)、yamada山田卤素强光灯、CEDAR思达